Specna Arms SA-A27-M ONE ™ TITAN ™ V2 Custom Carbine

Specna Arms SA-A27-M ONE ™ TITAN ™ V2 Custom Carbine

SA-A27-M ONE ™ TITAN ™ V2 Custom carbine replica

Limited version of the replica with the GATE TITAN ™ V2 Advanced system mounted!

The TITAN ™ V2 controller kit  Drop-In mosfet transforms AEG into an advanced training replica. With it you will get a tactical advantage, thanks to the rapid response to the trigger, with the possibility of modifying the replica and adapting it to each mission using the 20 available functions. This is the most advanced and top model from GATE. 

The TITAN ™ V2 controller breathes a whole new life into an ASG electric replica.

TITAN ™ gives new possibilities:

- Trigger sensitivity adjustment
- Pre-cocking boost, i.e. the regulation of maintaining a spring tension (shortens the time from pressing the trigger to the shot)
- Adjustment of fire selector modes
- Series shot mode
- Rate of fire adjustment
- Warns about low battery
- Protects the battery from damage
- " Sniper Delay "
- Full cycle detection - AUG mode - two trigger sensitivity settings (single and continuous fire)

The Specna Arms SA-A27-M carbine replica was made for the most part from a uniform zinc and aluminum alloy, using steel elements at the most sensitive points of the replica (so all screws, pins and tactical suspension handle are steel). The butt and pistol grip were made of polymer plastic. The replica body and the RIS rail assembly have been anodized , which guarantees a high degree of protection of the replica against corrosion. Painting the replica itself was done by powdering , after sanding the surface. This provides much higher than usual resistance of the applied paint to abrasion. The body has USMC markings.  

The replica was very well folded - in a way that could be seen so far almost exclusively with G&P or Classic Army class manufacturers - and perfectly balanced. This ensures perfect maneuverability of the replica, while its weight is almost imperceptible after placing the replica on the shoulder. 

The replica uses a quick spring change system, so-called Enter & Convert ™ . This allows you to quickly and efficiently adjust the replica's power to the conditions expected in the field of play without having to have access to a workshop or a number of specialized tools - after removing the gearbox from the replica body, the spring replacement process takes literally a few seconds. 

The advantages of the Enter & Convert ™ system are difficult to overestimate. In the light of the tendency throughout Europe to apply legal restrictions on the muzzle velocity of the replica and the arrangements existing within the environments themselves, this system guarantees the user considerable possibilities and a lot of freedom. The Enter & Convert ™ system allows you to replace the main spring with minimal time.

The replica is fully compatible with LiPo and LiFe batteries. An M90 spring is fitted, which allows muzzle velocity to around 300 FPS and as a result to adapt the replica for close-ranged and indoor operations. 

The system is secured with four anti-return latches. The light, made of polycarbonate plastic piston was equipped with a steel tooth to increase its strength. A type 2 cylinder and steel chopper were also used, as well as a metal hop-up chamber .    

The Upgraded version has a number of new, reinforced parts such as:

- set of reinforced steel gears
- steel spring guide
- lightweight polymer piston
- aluminum, sealed piston head
- metal cylinder head
- sealed metal nozzle

The replica is equipped with a 22 mm RIS dorsal rail, a set of MLOK front rails and an adjustable stock type SF. Flip-up sights are fitted on the upper RIS rail, but they can be freely replaced by any optoelectronic sights device. Thanks to the extendable butt with non-slip texture, it is possible to adjust the length of the replica to the construction and preferences of the shooter. The standard flame suppressor is mounted on a  14-mm left-hand thread , which allows the attachment of a silencer in its place.

To increase the realism of the game, the replica was also equipped with a working lock release . 

The replica set also includes a hi-cap steel magazine that holds 300 BBs. 

Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as:
 - BOYI,
 - Airsoft Systems,
 - SRC,
 - King Arms,
 - MAG,  - STAR,  - ACM. 

The set does not include battery and charger.

The kit includes:

- a replica with the TITAN ™ V2 system mounted
- a USB connector for controlling the unit using the GATE Control Station application
- a magazine 
- mechanical sights