Specna Arms SA-J08 Edge™ 2.0 /ESA 2™

SA-J08 EDGE 2.0™ Carbine Replica 

EDGE ™ is a series of Specna Arms replicas that combines a range of innovative solutions and technologies difficult to find in other replicas on currently the market. The series focuses on a very good external build, solutions increasing the replica's versatility, longevity, facilitating failure diagnostics, and susceptibility to power tuning.

Replica Features:

- receiver made out of steel sheet
-steel, one-piece outer barrel
- metal hop-up chamber
-Helium™ Flat Hop bucking
-precise aluminum inner barrel with a diameter of 6.03mm
- ESA2™quick spring change system - after folding the stock and removing the dust cover, we have access to the spring guide without the need to disassemble the gearbox shell.
- additionalM90main spring included
- pre-installed GATE ASTER™ V3 system
- reinforced ORION™ V3 Gearbox, which ensures high reliability. The mechanism is build to facilitate further tuning and is compatible withM140 springs. Inside the replica there are such elements as:

• reinforced polymer piston with a full steel jaw
• aluminum, double sealed cylinder head
• aluminum double sealed piston head with ball bearing
• spring guide with ball bearings
• set of steel gears

- muzzle device on 24mm CW / 14mm CCW thread
- side mounting rail of the "dovetail" type
- realistic structure in the VFC system, based on pins, levers and pins
- a lot of space for a stick type battery under the dust cover (LiPo ready)
- side-folding skeletal stock
-magwell spacer insert for easy magazine reloading
- originally designed mid-cap S-MAG magazines with a capacity of 130 BBs
- handguard made out of plywood.

Package include:

• 2 x mid-cap S-MAG magazine
• QC certificate
• Deans adapter - small Tamiya
• GATE ASTER diagnostic card
• Instructions
• Replica

Package exclude:

• The set does not include the battery nor charger