NP 7.4v 600mah 20c Tamiya for PDW

NP 7.4v 600mah 20c Tamiya for PDW

Price: £9.99

Only 3 Available!

Qty:

Rated

Not rated

(0)

  • STATS - LiPo | 7.4v | 600 mAh | 20C/40C @ 12A/24A (Cont/Burst) - Airsoft AEGs use the "Burst" flow rate to start the motor, and then the "Cont" flow rate to provide continuous discharge (check your owners manual to ensure the battery purchased meets the minimum flow rate (C) of your AEG) - this battery provides approximately 3 minutes of continuous discharge before running flat.
  • LITHIUM POLYMER - LiPo batteries have an excellent size/weight to capacity ratio, allowing you to fire more shots with a smaller battery. LiPo batteries can be recharged at any charge level without damaging the overall capacity of the battery. LiPo batteries should not be "run-flat", as this can damage the battery and effect overall charge ability. LiPo batteries MUST be charged with a LiPo Balance Charger. LiPo batteries should always be charge in a fire-retardant Safe-Charging-Bag.
  • PDW - rear wired Airsoft Replicas with PDW buttstocks require very small batteries to fit within. Always check the dimensions of the battery vs the battery compartment to ensure compatability.
  • MINI TAMIYA - this battery is suitable for Airsoft Replicas using a Mini-Tamiya battery connector.
  • QUALITY CONTROL - NP Power batteries are produced at an ISO 9000 Quality Control accredited manufacturing plant and shipped at an optimal charge rate of ≥60% to protect against degradation when in transport/ storage.
ChemistryLiPo - Lithium Polymer
Capacity600mAh
Voltage (Cell Count)7.4v (2S)
Constant Discharge (@ Max Current)20c @ 12A
Burst Discharge (@ Max Current)40c @ 24A
Watt Hours4.44Wh
ConnectorSmall Tamiya
Balance ConnectorJST-XH
Cable GaugeAWG 16
ConfigurationPDW
Weight (g)44
Dimensions16 x 16 x 70 mm

©2026 JD Airsoft Limited
Unit 5 Virage Park, Green Lane, Cannock, Staffordshire, WS11 0NH

Site by Charles Design
The item has been added to your cart.
Go to Checkout Continue Shopping 3...